TBC-1000: SINGLE CHANNEL FULL FRAME 4:2:2 TBC

WITH A BUILT IN 4 OUTPUT DISTRIBUTION AMPLIFIER

Improve Video Signal Quality – Get clean video captures
Most video camcorders produce relatively unstable, synchronized signals.
This can cause poor video image quality when capturing to your PC or
recording to another deck. The TBC-1000 corrects this by replacing all
sync signals from the video source with new signals.

KEY FEATURES

• Self contained, stand-alone
• Compatible with VHS, VHS-C, S-VHS, S-VHS-C Video 8, Hi 8 and
  Digital 8 format.
• Digital frame synchronization with full frame memory.
• Re-generates all synchronization signals to stabilize the video.
• Auto-detects NTSC or PAL format.
• Wide bandwidth- 4.5MHz in Y/C and 3.5 MHz in composite.
• 8-bit video resolution - 4:2:2 sampling rate DP < 1 Degree
• DG less than 2%
• Low noise, S/N ratio > 50dB
• Built in DA with 4 outputs

SPECIFICATIONS

Unit Dimensions
(Width x Depth x Height) 210x210x55 mm

Net Weight
7 lbs

Inputs
Y/C Video (S-Video) 4-pin 75 ohm DIN connector (1)
Composite video 75 ohm RCA connector, level: 1.0VP-P (1)
Stereo Audio RCA Connectors, Impedance: 100K ohm (1)

Outputs
Y/C Video (S-Video) (4)
pin 75 ohm DIN connector (4)
Composite video 75 ohm RCA connector, Level: 1.0VP-P/Unity
Stereo Audio RCA Connectors, Impedance: 1K ohm. Level: unity (4)

General
Frequency response S-Video 4.5 MHz +/- 3dB
DG, DP +/- 2%, 1
S/N Ratio > 50dB
Component Y.U.V. 4:2:2 8-bit, Y: 13.5MHz
Single channel full frame Time Base corrector
Auto Detects NTSC and PAL signals
Power requirement DC 12V, 1.2 amps
Ambient Temperature range 32’-131’F (0’-55’C)
Ambient Humidity < 90%

Accessories
Y/C (S-Video) cables, Composite (RCA) Cables
DC 12V 1.2 amps supply (110V or 220V)